Product Description Model NO.: ND-SXST-1A-II Working Station: 1 Station Balancing Method: Adding Weight. Power: 380V Trademark: NIDE Specification: customized HS Code: 9031100090 Armature Diameter Range: Max 500mm Residual Unbalancing Value: 1gmm/Kg Cutting Method: Drilling/Milling Machine Weight: 2t Transport Package: Plywooden-Case Origin: China This semi-auto rotor balancing machine is using weight removing method to do armature balancing. During machine running, operator needs to load and unload the armature manually, other stpes will be done by machine automatically. The machine is equipped with touch screen. All the parameter can be set and displayed in the touch screen. 
  Technical parameter of balancing machine:

Type	Two-station(single-tool/double-tools)
Main components   configuration	Air   cylinder: SMC Actuating   motor: Mitsubishi Sensor:   KEYENCE,OMRON,CONTRINEX Touchscreen:   KEYENCE Control   PLC: KEYENCE KV-1000 Stepping   motor: Oriental Motor
Rotor   radius	Motor   rotor below 1.6KG Stack   height :20-70mm Rotor   diameter: Φ20-45mm, 40-70mm
Balancing   speed	1600-2100rpm
Milling   method	R-shape or V-shape
Power	AC380V
Air   supply	0.4~0.6Mpa
Initial   unbalance	In   accordance with difference of rotor radius and cutting depth, for   example, the max single cut on diameter of 32mm≤500mg, the max single cut on diameter of   40mm ≤800mg
Processing   cycle   time(type II)	12-16s(testing, milling from side to side) Starter armature 25s
One   time cutting qualified rate	>=90%
Max   removing volume	>=90%
Imbalance repeat measuring precision	≤0.5g.mm (±5mg)
Fixture changing time	Same armature O.D ≤5 mins Different armature O.D  ≤ 15 mins
Residual   unbalance eccentricity	Better   than the national standard for Grade 6.3
Volume (length   x width x height)	1300   x 1000 x 1300 mm

  Daily Check and Maintain
1. Clean the dust and iron filings on the machine.
2. Check the vulnerable components (eg: leather belt, Iron piece, drill), please replace them if they are damaged.
3. Spraying antirust oil to prevent the machine rusty.   Month Check and Maintain
1. Check the machine power.
2. Check the machine each function module is normal.
3. Check the machine test station.   Rotor suitable for this machine

Contact us if you need more details on Rotor Balancing Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Rotor Correction Machine、Rotor Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Armature Winding Line > Other Machine