Product Description
Model NO.: QLB1-200/250 Stator I.D: 80~180mm Slot Number Range: 8~48 Slots Power Source: 380V/50Hz Machine Dimension: 1500mm*680mm*1100mm After-Sales Service: Overseas Service Center Available Transport Package: Wooden Case Suitable for Sea Transportation Origin: China Max Stator O.D.: 0~300mm Max Stator Stack Length: 200mm Max Winding Feeding Rate: 80% Air Source: 0.5-0.8MPa Weight: About 350kg Trademark: NIDE Specification: ISO9001 HS Code: 8479819000 Semi-auto Motor Stator Coil Winding Insertion Machine
Description:
This machine is specially designed for the motor manufacturers who have different sizes motor and need to change the tooling frequently. The tooling change-over time is 20~30 minutes. It only takes 1/4 time comparing the conventional machine. The wedge is prepared by a wedge
Inserting Machine, and operator transfers it to the
Coil Inserting Machine, then the maThe tooling change-over time is 20~30 minutes. It only takes 1/4 time comparing the conventional machine. chine insert coil and wedge simultaneously into the stator. The machine could set and save different data for different stators. It could use different motor production and specially good for the single phase and three phase induction motor manufacturers.
Technical parameter:
Stator I.D | 80~180mm |
Stator O.D | 0~300mm |
Stator stack length | 10~200mm |
Slot number range | 8~48 slots |
Appropriate wire | copper/aluminium wire |
Tooling traveling distance | Max.110mm |
Max. Slot filling rate | 80% |
Input | 380V/50Hz |
Power source | 380/50/60Hz 3Kw |
Dimension | 1500mm*680mm*1100mm |
Weight | ≈ 350kg |
Machine main function and characteristic
The machine insert coil and wedge simultaneously, coil insertion is controlled by servo motor system.
It is controlled by HMI, and machine can diagnose breakdown automatically.
Both copper wire and aluminium wire are applicable.
Production capacity ≤20s/set (exclude the man-hours for auxiliary work)
Primary qualification rate for copper wire ≥98%, after rework, the rate ≥99.5%
Wire pushing height and stop time can be set in the HIM interface.
The machine has fixed foot and removable wheel.
Wedge should not be damaged, no burr in the surface, no movement or slide.
Wedge should not be damaged, no movement or slide. Copper wire should not be pull away from the paper.
The stator should not be deformation or stator lamination should not be upward.
Competitive advantages:
Easy operation and convenient tooling change. The tooling change-over time is 20~30 minutes. It only takes 1/4 time comparing the conventional machine.
Contact us if you need more details on Coil Insertion Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about
Winding Machine、Insertion Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Stator Winding Line > Coil Inserting Machine