Product Description

Model NO.: ND-LAW-5B2


Certification: ISO, CCC


Heating System: No Heating


Automatic Winding: Armature Winding


Rotor Winding: Improved Winding


Stack Length: 20~60mm


Shaft Length: Less Than 300mm


Commutator Diameter: 12~40mm


Trademark: NIDE


Origin: China




Precision: Precision


Demoulding: Automatic


Automatic Grade: Automatic


Chain Automatic Loading,Unloading: Rod Automatic Loading, Manual Unloading


Armature O.D Range: 20~60mm


Shaft Diameter: 3~17mm


Turn Number: 0~9999


Winding Speed: 0~3000 Rpm


Transport Package: Ply-Wooden Case


HS Code: 8479811000


Detailed Product Description

This armature Winding Machine is used for automatically hook type commutator armature winding, it is suitable for winding medium and big wire diameter armature. Automatic feeding, winding,indexing and wire cutting, only load and unload armature from material loader. Equipped with touch screen and PLC, winding parameter could be set and modified on the screen. We also have armature winding machine equipped with conveyor, operator only need to put several pieces of armature on the conveyor at one time, then machine will finish all the armatures automatically. Below parameter is our standard machine, we could produce machine according to customer's armature accordingly.



Production efficiency of this machine

Around 1000pcs/8 hours,it is only a rough idea, depends on the armature slots number and turn number.



The operation steps of this machine

Load armature on the shuttle manually, press START button,shuttle will deliver the armature to the winding position, and automatic winding, indexing and wire cutting,after completing, the shuttle will take out the finished armature from winding position, operator unload the finished armature, one cycle is completed.



Common malfunction of this machine

Sometimes, there is servo alarm displayed on the touchscreen. In this case, there will be error code displayed on the servo driver(at the backside of machine), you could identify the problem according to the error code. The most common malfunction is the encoder cable which connects the servo driver and servo motor is loose, just need remove and reinsert the encoder cable again, problem will be solved.

Contact us if you need more details on Winding Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Rotor Winding Machine、Motor Production Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Armature Winding Line > Armature Windingmachine